Light Ship Weight EstimatingHere is an overview of the proposed method for estimating a design's light ship weight and some of the figures used for estimating w100, w200, w300, w500, and w600 weights related to overall vessel dimensions and other principle characteristics.w100 - Structures Weight - In general for w100 weights, I have plotted them against the vessel's cubic number (which is equal to the vessel's length x beam x hull depth). w200 - Propulsion Plant Weight - For w200 weights I have plotted the total propulsion plant weight versus the installed propulsion power, as shown below. I show several trend lines on the graph.
w300 - Electric Plant Weight - For w300 weights I have plotted the total electrical plant weight versus the installed electrical power, as shown below. Where possible I've tried to show which data points represent different plant types, however, right now I only show a single trend line through all the data points. I
have added a second plot of w300 versus Full Load Displacement as a
second check of electrical plant weight.
w500 - Auxiliary Systems Weight - For w500 weights, I have plotted them against the vessel's cubic number (which is equal to the vessel's length x beam x hull depth). w600 - Outfit & Furnishing Weight - For w600 weights, I have plotted them against the vessel's cubic number (which is equal to the vessel's length x beam x hull depth). w400 - C4ISR Weight - With respect to w400 weights, although an initial estimate can be made based on the data provided on the Pre-Processor sheet, eventually it will become necessary to come up with a better estimate of some of the individual subcomponents of this group. As such below is a graph of w410 through w440 versus cubic number, which should help users in making a better estimate of these weights as their designs are developed. In general, w410 through w440 represent weights within the w400 group that may be more related to overall vessel size than some of the other components, and thus may vary from the intial estimates made in the Pre-Pocessor section, especially if the size of the vessel is varied. For reference;
Additionally, a second graph of just w420 and w430 weights is also provided below as some of the cost estimating methodologies I have been reviewing treat the weights for these groups slightly differently than the rest of the w400 weights. w700 - Armament Weight - With respect to w700 weights, here is a graph of w700 weight versus full load displacement for reference, to show how the size of the weaponry of the proposed ship compares to other similar vessels. |